Journal Guide

2009 Impact Factor: 1.604 (169; 2010 Thomson Reuters, Journal Citation Reports174;)Geophysical and Astrophysical Fluid Dynamics exists for the publication of original research papers and short communications, occasional survey articles and conference reports on the fluid mechanics of the earth and planets, including oceans, atmospheres and interiors, and the fluid mechanics of the sun, stars and other astrophysical objects.In addition, their magnetohydrodynamic behaviours are investigated. Experimental, theoretical and numerical studies of rotating, stratified and convecting fluids of general interest to geophysicists and astrophysicists appear. Properly interpreted observational results are also published.All published research articles in this journal have undergone rigorous peer review, based on initial editor screening and anonymized refereeing by independent and expert referees.Taylor & Francis makes every effort to ensure the accuracy of all the information (the 8220;Content8221;) contained in its publications. However, Taylor & Francis and its agents and licensors make no representations or warranties whatsoever as to the accuracy, completeness or suitability for any purpose of the Content and disclaim all such representations and warranties whether express or implied to the maximum extent permitted by law. Any views expressed in this publication are the views of the authors and are not the views of Taylor & Francis.

The aim of the International Journal of Applied Electromagnetics and Mechanics is to contribute to intersciences coupling applied electromagnetics, mechanics and materials. The journal also intends to stimulate the further development of current technology in industry. The main subjects covered by the journal are:* Physics and mechanics of electromagnetic materials and devices;* Computational electromagnetic in materials and devices;* Applications of electromagnetic fields and forces.The three interrelated key subjects - materials, electromagnetics and mechanics - include the following aspects: control, micromachines, intelligent structure, inverse problem, eddy current analysis, electromagnetic NDE, magnetic materials, magnetoelastic effects in materials, bioelectromagnetics, magnetosolid mechanics, magnetic levitations, applied physics of superconductors, superconducting magnet technology, superconducting propulsion system, nuclear fusion reactor components and wave propagation in electromagnetic fields.The editorial policy is to combine information and experience from both the latest high technology fields and the well-established technologies within applied electromagnetics and mechanics.The editors hope to furtherly enhance the theoretical framework for our field from the interaction of old and new concepts. In order to assist readers to quickly grasp the current status of research in a specific area of applied electromagnetics and mechanics, both contributed and invited papers are published in special and thematic issues as well as regular issues.

The International Journal of Engineering Science is not limited to a specific aspect of science and engineering but is instead devoted to a wide range of subfields in the engineering sciences. While it encourages a broad spectrum of contribution in the engineering sciences, its core interest lies in issues concerning material modeling and response. Articles of interdisciplinary nature are particularly welcome.The primary goal of the new editors is to maintain high quality of publications. There will be a commitment to expediting the time taken for the publication of the papers. The articles that are sent for reviews will have names of the authors deleted with a view towards enhancing the objectivity and fairness of the review process.Articles that are devoted to the purely mathematical aspects without a discussion of the physical implications of the results or the consideration of specific examples are discouraged. Articles concerning material science should not be limited merely to a description and recording of observations but should contain theoretical or quantitative discussion of the results.From time to time, the Journal will publish review articles and bring out special issues on a specific sub-field of engineering science. Authors are encouraged to contact the Editors if they would like to submit a review article or bring out a special issue of the Journal.The Editors reserve the right to reject papers without sending them out for review.

Benefits to authors
We also provide many author benefits, such as free PDFs, a liberal copyright policy, special discounts on Elsevier publications and much more. Please click here for more information on our http://www.elsevier.com/wps/find/authorsview.authors/authorservicesauthor services.

Please see our http://www.elsevier.com/wps/find/journaldescription.cws_home/299/authorinstructionsGuide for Authors for information on article submission. If you require any further information or help, please visit our support pages: http://support.elsevier.com

The work of publishing houses like Freund Publishing house ltd, an Israel publishing house, is quite complicated. The editor chooses from the "manuscripts" submitted to the publishing house, previously published works, works published in other languages, or command works, works that fit the editorial line of its collections. After any corrections, it shall communicate the text to a printer in suitable technical characteristics of the book and the number of copies to print.The editor takes the bulk of the financial risks of publishing. The profits go mainly to the broadcaster and distributor of books, which are responsible, to canvass the booksellers and take their orders as well as routing the books to bookstores, to fill orders taken. These operations cost the publisher between 50 and 60% of turnover generated by the book. The rest of sales goes to the author (about 10% share of this figure much lower, around 6% for comic books, and can reach 20% or more for best sellers) and the publisher, who can pay, in addition to its employees (editorial assistants, press officers, charged with manufacture, designer, etc..), the entire work of the book (printers, proofreaders, freelance photographers, possibly librarians, etc.. ). The publisher who coordinates the course of the "book chain" and, often, which also establishes the financial plan incorporating the expected costs and expected gains, as in any business.

Materials Science & Engineering R: Reports publishes invited review papers covering the full spectrum of materials science and engineering. The reviews, both experimental and theoretical, provide general background information as well as a critical assessment on topics in a state of flux. The editorial policy of Materials Science & Engineering R: Reports is to serve its readership in two ways. Firstly, it provides a critical overview of the current issues in a well-defined area of immediate interest to materials scientists. Secondly, each review contains an extensive list of references thus providing an invaluable pointer to the primary research literature available on the topic. This policy is implemented by the Editorial Board which consists of outstanding scientists in their respective disciplines. The Board identifies the topics of interest and subsequently invites qualified authors. In order to ensure speedy publication, each review is published separately.Benefits to authorsWe also provide many author benefits, such as free PDFs, a liberal copyright policy, special discounts on Elsevier publications and much more. Please click here for more information on our author services.Please see our Guide for Authors for information on article submission. If you require any further information or help, please visit our support pages: http://support.elsevier.com

Furthering the Materials Today mission to aid the creation and sharing of materials science knowledge and experience, Materials Today Communications offers the materials science community an innovative, efficient and flexible route for the publication of scientifically and ethically sound articles which may not always find the right home on first submission. Our highly experienced and well-respected editorial team, composed of Editors and Editorial Board members from across Elsevier's materials science journals, ensure that all papers are rigorously and fairly peer-reviewed.

Peer-reviewed articles that meet the standards of quality set by the Editors and Referees of our sister journals, but which were considered unsuitable for publication in those journals, will be automatically accepted for publication in Materials Today Communications without resubmission or additional review*. Rapid publication of accepted articles is achieved using article-based, online publishing to ensure each paper is visible to the community as quickly as possible.

Materials Today Communications publishes original research papers of any length, and follows a hybrid publication model, providing authors with the option to publish their papers Open Access for a fee of 1000 USD or freely via the subscription route.

*provided that the manuscript is amended according to the comments of the reviewers, and as judged by the managing editor.

Mechanics of Materials is a forum for original scientific research on the flow, fracture, and general constitutive behavior of geophysical, geotechnical and technological materials, with balanced coverage of advanced technological and natural materials, with balanced coverage of theoretical, experimental, and field investigations. Of special concern are macroscopic predictions based on microscopic models, identification of microscopic structures from limited overall macroscopic data, experimental and field results that lead to fundamental understanding of the behavior of materials, and coordinated experimental and analytical investigations that culminate in theories with predictive quality.Original contributions are published on the thermomechanical behavior of technological materials such as metals, polymers, ceramics, various advanced composites, wood, etc., geotechnical materials such as rock and soil, and on thermomechanical processes pertaining to solid earth geophysics. The journal contains research papers, invited review articles, brief notes, letters to the editor, book reviews and news items.Benefits to authorsWe also provide many author benefits, such as free PDFs, a liberal copyright policy, special discounts on Elsevier publications and much more. Please click here for more information on our author services.Please see our Guide for Authors for information on article submission. If you require any further information or help, please visit our support pages: http://support.elsevier.com

This international journal provides a medium of communication between engineers and scientists engaged in research and development within the fields of knowledge embraced by IFToMM, the International Federation for the Promotion of Mechanism and Machine Science.The main topics are: • Design Theory and Methodology; • Haptics and Human-Machine-Interfaces; • Robotics, Mechatronics and Micro-Machines; • Mechanisms, Mechanical Transmissions and Machines; • Kinematics, Dynamics, and Control of Mechanical Systems;• Applications to Bioengineering and Molecular Chemistry.Methodologically, this includes theoretical, experimental, and/or historical approaches, along with their practical application, including education. Substantially, the journal aims at covering all subjects related to mechanisms and machines in general, such as: design theory and methodology, kinematics of mechanisms, rotor dynamics, computational kinematics, multibody dynamics, dynamics of machinery, nonlinear vibrations, linkages and cams, gearing and transmissions, transportation machinery, control and reliability of mechanical systems, including hydraulic and pneumatic systems, experimental test techniques, robots and robotic technologies, mechatronics, micromachines, human-machine interfaces, haptics, among others. Prospective fields of application of mechanism and machine science to other scientific areas such as bioengineering and molecular chemistry are also welcome.For more information on IFToMM, visit their home page on the Internet at www.iftomm.org.

Progress in Aerospace Sciences is an international review journal designed to be of broad interest and use to all those concerned with research in aerospace sciences and their applications in research establishments, industry and universities. The journal is devoted primarily to the publication of specially commissioned review articles designed to bring together under one cover current advances in the ever-broadening field of aerospace sciences. No artificial limits are imposed on the length of papers and authors are encouraged to provide specialist readers with an orderly and concise summary of recent work, including sufficient detail for more general aerospace readers to be informed of recent developments in fields other than their own.The coverage of the journal includes timely reviews in aeronautics and astronautics, especially in important aerospace areas such as aero- and gas dynamics, aero-and space structures, flight mechanics of air and space vehicles, materials, vibrations, aeroelasticity, acoustics, aero- and space propulsion, avionics, and occasionally some related areas as well, such as wind engineering and hydrodynamics. "While the emphasis is on reviews of current developments, papers providing historical perspectives on important past developments and their pioneers are also welcome. Occasionally, the journal also publishes reviews of new books on aerospace topics."

This journal is an international medium for the rapid publication of original research papers, short communications and subject reviews dealing with research on and applications of electronic polymers and electronic molecular materials including novel carbon architectures. These functional materials have the properties of metals, semiconductors or magnets and are distinguishable from elemental and alloy/binary metals, semiconductors and magnets.Materials considered to be within the purview of this journal include:• low-dimensional conductors and superconductors such as organic charge-transfer compounds and metal chain compounds• conducting and semiconducting polymers and molecular materials• fullerenes, carbon nanotubes and related novel carbon architectures• supramolecular conjugated architectures• nanoscale electronic molecular and electronic polymer materials• molecule- and polymer-based magnets.Experimental, theoretical and application papers on the chemistry, physics and engineering of these materials are encouraged for submission. Original manuscripts on their chemical, electrochemical, electrical, photonic and magnetic properties will be considered for publication. Papers on electronic, electroluminescent, lasing, solar cell, anticorrosion, sensor, actuator, biological and other potential device applications of these materials are encouraged.

Welding International is a well-established and widely respected journal that provides English translations of complete articles selected from major international welding journals, including:Biuletyn Instytutu Spawalnictwa PolandJournal of Japan Welding Society JapanJournal of Light Metal Welding and Construction JapanPrzeglad Spawalnictwa PolandQuarterly Journal of Japan Welding Society JapanRevista de Metalurgia SpainRivista Italiana della Saldatura ItalySoldagem & Inspe o BrazilSoudage et Techniques Connexes FranceSvarochnoe Proizvodstvo RussiaWelding Technology - JapanThe translators for Welding International are carefully chosen and each issue contains a balanced selection of between 15 and 20 articles. The articles cover research techniques, equipment and process developments, applications and material and are not available elsewhere in English.Welding International provides a valuable and unique service for those needing to keep up-to-date on the latest developments in welding technology in non-English speaking countries.DisclaimerTaylor & Francis makes every effort to ensure the accuracy of all the information (the "Content") contained in its publications. However, Taylor & Francis and its agents and licensors make no representations or warranties whatsoever as to the accuracy, completeness or suitability for any purpose of the Content and disclaim all such representations and warranties whether express or implied to the maximum extent permitted by law. Any views expressed in this publication are the views of the authors and are not the views of Taylor & Francis.

Acta Mechanica Solida Sinica aims to become the best journal of solid mechanics in China and the known one in the world in the field of mechanics, by building up an international exchange platform for the ecological research; providing original, perspective and even breakthrough theories and methods for the research on solid mechanics in China and in the world; serving the sustainable development worldwide.The Journal is devoted to the publication of research papers in English in all fields of the solid-state mechanics and its related disciplines in science, technology, and engineering, with a balanced coverage on analytical, experimental, numerical and applied investigations. Articles, Letters, Discussions on previously published papers, and invitation-based Reviews are published bimonthly. No length limitations for regular and review articles are set. Letters (4 pages or less) that report novel theories, experimental and numerical findings, are usually published within three months after receipt. Papers which are merely methodological without showing essential advantages in applications, and papers which do not study deformable solids are out of the score of the Journal.Benefits to authorsWe also provide many author benefits, such as free PDFs, a liberal copyright policy, special discounts on Elsevier publications and much more. Please click here for more information on our author services.Please see our Guide for Authors for information on article submission. If you require any further information or help, please visit our support pages: http://support.elsevier.com

Pressure vessel engineering technology is of importance in many branches of industry. This journal publishes the latest research results and related information on all its associated aspects, with particular emphasis on the structural integrity assessment, maintenance and life extension of pressurised process engineering plants.The anticipated coverage of the International Journal of Pressure Vessels and Piping ranges from simple mass-produced pressure vessels to large custom-built vessels and tanks. Pressure vessels technology is a developing field, and contributions on the following topics will therefore be welcome:• Pressure vessel engineering• Structural integrity assessment• Design methods• Codes and standards• Fabrication and welding• Materials properties requirements• Inspection and quality management• Maintenance and life extension• Ageing and environmental effects• Life managementOf particular importance are papers covering aspects of significant practical application which could lead to major improvements in economy, reliability and useful life. While most accepted papers represent the results of original applied research, critical reviews of topical interest by world-leading experts will also appear from time to time.International Journal of Pressure Vessels and Piping is indispensable reading for engineering professionals involved in the energy, petrochemicals, process plant, transport, aerospace and related industries; for manufacturers of pressure vessels and ancillary equipment; and for academics pursuing research in these areas.

Materials Characterization features original articles and state-of-the-art reviews on theoretical and practical aspects of the structure and behaviour of materials.The Journal focuses on all characterization techniques, including all forms of microscopy (light, electron, acoustic, etc.,) and analysis (especially microanalysis and surface analytical techniques). Developments in both this wide range of techniques and their application to the quantification of the microstructure of materials are essential facets of the Journal.The Journal provides the Materials Scientist/Engineer with up-to-date information on many types of materials with an underlying theme of explaining the behavior of materials using novel approaches. Materials covered by the journal include:Metals & alloysCeramicsNanomaterialsBiomedical materialsOptical materialsCompositesNatural MaterialsPlease note that not all topics fall within the scope of Materials Characterization. Submissions focused on the topics listed below will not be considered for publication, potential alternative journals are indicated in brackets:thin film semiconductors (Thin Solid Films; Materials Science in Semiconductor Processing)polymers or polymer composites (Elsevier polymer titles; Composites structures)mechanical, electrical or other property measurements without any accompanying microstructural characterization (depending on the focus, please consider submitting to Corrosion Science; Wear; Materials Science & Engineering B; Materials & Design)computation, theory or analysis papers without an accompanying microstructural characterization component (Computational Materials Science; Materials Science & Engineering A; Materials Science & Engineering B; Materials Science & Engineering C)

Materials Letters is dedicated to publishing novel, cutting edge reports of broad interest to the materials community. The journal provides a forum for materials scientists and engineers, physicists, and chemists to rapidly communicate on the most important topics in the field of materials.Contributions include, but are not limited to, a variety of topics such as:• Materials - Metals and alloys, amorphous solids, ceramics, composites, polymers, semiconductors• Applications - Structural, opto-electronic, magnetic, medical, MEMS, sensors, smart• Characterization - Analytical, microscopy, scanning probes, nanoscopic, optical, electrical, magnetic, acoustic, spectroscopic, diffraction• Novel Materials - Micro and nanostructures (nanowires, nanotubes, nanoparticles), nanocomposites, thin films, superlattices, quantum dots.• Processing - Crystal growth, thin film processing, sol-gel processing, mechanical processing, assembly, nanocrystalline processing.• Properties - Mechanical, magnetic, optical, electrical, ferroelectric, thermal, interfacial, transport, thermodynamic• Synthesis - Quenching, solid state, solidification, solution synthesis, vapor deposition, high pressure, explosiveBenefits to authorsWe also provide many author benefits, such as free PDFs, a liberal copyright policy, special discounts on Elsevier publications and much more. Please click here for more information on our author services.Please see our Guide for Authors for information on article submission. If you require any further information or help, please visit our support pages: http://support.elsevier.com

Materials Science in Semiconductor Processing provides a unique forum for the discussion of novel processing, applications and theoretical studies of functional materials and devices for (opto)electronics, sensors, detectors, biotechnology and green energy.Each issue will aim to provide a snapshot of current insights, new achievements, breakthroughs and future trends in such diverse fields as microelectronics, energy conversion and storage, communications, biotechnology, (photo)catalysis, nano- and thin-film technology, hybrid and composite materials, chemical processing, vapor-phase deposition, device fabrication, and modelling, which are the backbone of advanced semiconductor processing and applications.Coverage will include: advanced lithography for submicron devices; etching and related topics; ion implantation; damage evolution and related issues; plasma and thermal CVD; rapid thermal processing; advanced metallization and interconnect schemes; thin dielectric layers, oxidation; sol-gel processing; chemical bath and (electro)chemical deposition; compound semiconductor processing; new non-oxide materials and their applications; (macro)molecular and hybrid materials; molecular dynamics, ab-initio methods, Monte Carlo, etc.; new materials and processes for discrete and integrated circuits; magnetic materials and spintronics; heterostructures and quantum devices; engineering of the electrical and optical properties of semiconductors; crystal growth mechanisms; reliability, defect density, intrinsic impurities and defects.

Microporous and Mesoporous Materials covers novel and significant aspects of porous solids classified as either microporous (pore size up to 2 nm) or mesoporous (pore size 2 to 50 nm). The porosity should have a specific impact on the material properties or application. Typical examples are zeolites and zeolite-like materials, pillared materials, clathrasils and clathrates, carbon molecular sieves, ordered mesoporous materials, organic/inorganic porous hybrid materials, or porous metal oxides. Both natural and synthetic porous materials are within the scope of the journal.Topics which are particularly of interest include:All aspects of natural microporous and mesoporous solidsThe synthesis of crystalline or amorphous porous materialsThe physico-chemical characterization of microporous and mesoporous solids, especially spectroscopic and microscopicThe modification of microporous and mesoporous solids, for example by ion exchange or solid-state reactionsAll topics related to diffusion of mobile species in the pores of microporous and mesoporous materialsAdsorption (and other separation techniques) using microporous or mesoporous adsorbentsCatalysis by microporous and mesoporous materialsHost/guest interactionsTheoretical chemistry and modelling of host/guest interactionsAll topics related to the application of microporous and mesoporous materials in industrial catalysis, separation technology, environmental protection, electrochemistry, membranes, sensors, optical devices, etc.The journal publishes original research papers, short communications, review articles and letters to the editor.

Composites Part A: Applied Science and Manufacturing publishes original research papers, review articles, case studies, short communications and letters from a wide variety of sources dealing with all aspects of the science and technology of composite materials, including fibrous and particulate reinforcements in polymeric, metallic and ceramic matrices, and 'natural' composites such as wood and biological materials. The range of applicable topics includes the properties, design and manufacture of reinforcing fibers and particles, novel architectures and concepts, multifunctional composites, advances in fabrication and processing of composite materials and structures, manufacturing science, process modelling, experimental mechanics, microstructural characterization of composites and their constituent phases, interfaces in composites, new approaches to prediction and measurement of mechanical, physical and chemical behaviour, and performance of composites in service. Articles are also welcomed on economic and commercial aspects of the applications of composites, design with composites and case studies. All articles are subject to rigorous peer review to ensure they make an important and novel contribution, and a high standard is set for both content and presentation. The Editors aim to conduct the review procedure with the minimum of delay so that prompt publication ensues.Benefits to authorsWe also provide many author benefits, such as free PDFs, a liberal copyright policy, special discounts on Elsevier publications and much more. Please click here for more information on our author services.Please see our Guide for Authors for information on article submission. If you require any further information or help, please visit our support pages: http://support.elsevier.com

The aim of Composites Part B: Engineering is to provide a balance between mechanics and materials science aspects, basic and applied research, and high technology and high volume (low cost) composite development.The Journal aims to provide a forum for the prompt publication of original research on all areas of composites and nano-engineered materials, with emphasis being placed on evaluation and modelling of engineering details and concepts. Basic research papers are welcomed as well as proposals for review articles. Authors are encouraged to discuss the issues relative to application in the short or long-term in various areas, such as aerospace, automotive and other surface transportation, infrastructure, ship-building, off-shore piping, and recreational products.Current topics of interest to readers include durability, functionally gradient materials, interfaces, interlaminar fracture, joints and adhesion, smart composites, textile composites, thermoplastics, wave propagation, and non-destructive testing.Composites Part B: Engineering ranks 7 out of 90 (top 8%) of all journals in Engineering Multidisciplinary category © Thomson Reuters ISI Subject Category 2012Benefits to authorsWe also provide many author benefits, such as free PDFs, a liberal copyright policy, special discounts on Elsevier publications and much more. Please click here for more information on our author services.Please see our Guide for Authors for information on article submission. If you require any further information or help, please visit our support pages: http://support.elsevier.com